|
|
| |
|
Great Protection Indoors & Out!
Our high-performance fabric.
 WeatherShield®,
uses the patented EPIC by Nextec® encapsulation process,
originally developed for high performance outdoor
sports-wear. Their proprietary technology uses
precision and controlled placement of special polymers to
make ordinary fabrics extraordinary!
This encapsulation process places an ultra-thin film
around the fabric fibers and precisely places a
durable, breathable barrier within the woven polyester
fabric to complete the high performance finish process.
Unlike traditional coatings and laminations that just
protect one side of the fabric, Nextec uses up to 40
computerized process controls to place protective
polymers inside the fabric, to shed water, dust, bird
droppings, tree sap and industrial pollutants.
The
result is a fabric that provides maximum protection, but isn't
bulky and hard to store. Using Nextec
encapsulation technology we've created the ultimate car
cover...and we named it WeatherShield because no other
fabric has every shielded your car or truck from the
elements like this one!
 This
magnified photo gives you an idea how the encapsulation
coats the fibers and fills the voids between the threads
with a breathable barrier to assure moisture, dust and
pollutants are kept away from the vehicles finish. The
base, high-strength, polyester fabric is naturally UV
resistant, but we've added UV inhibitors to the polymers to
help slow-down the degradation that occurs naturally on
anything exposed to sun for an extended period of time.
- Weatherproof
- Fabric sheds water as soon as it hits the cover.
- Superior
Dry Time
- Because the fabric sheds moisture it has an absorption
factor of only 2%, compared with up to 40% for standard
woven and non-woven fabrics. That means, if the
cover has been sitting out in the rain you only need to
shake it and the residue moisture will easily dry, in
the trunk or on the car.
- Breathable
- Allows any heat or condensation under the cover to
easily escape.
- UV
Resistant
- Special additives prevent UV degradation and protect
the vehicles finish and interior.
- Dust-proof
- Patented fiber encapsulation process prevents dust
from filtering through the fabric.
- Scratch-less
- Polymers provide a silky smooth finish to the fabric
and provide superior paint protection. Nextec
fabric has been tested at 1,000 cycles on abrasion
wheels without scratching (surface must be clean and
waxed).
- Durable
- The encapsulation process is not affected by heat or
cold and the process won't degrade over the life of the
fabric.
- Easy
Care
- Unlike non-woven fabrics you can clean most car-size
WeatherShield covers in your HOME washer and dryer.
- Packs
Small & Light
- All this protection in a lightweight package that
packs into 1/4 to 1/2 the volume of multi-layer,
non-woven fabrics. That's a cover for a Honda
Accord he's holding - minimal storage space, but
high-performance protection.
Now Choose From 8
different Colors!
       
Also available in
Multi-colors....
 Do
not forget to us ask about custom embroidery.
Single Color Prices
start from $328.95
Multi
Color Prices
start from $367.95
|
|
Car Cover
Accessories
Cover
Lock $9.95
Storage Bag $9.95
|
WeatherShield
now has a "big brother"...... WeatherShield HD
Developed
primarily for intense sun environments and long-term storage,
WeatherShield HD not
only provides UV opacity, it repels water, blocks dust, tree
sap and bird droppings, and is still breathable to
allow moisture and heat to escape from under the cover.
The base material for WeatherShield HD is woven by Glen Raven
Mills (makers of Sunbrella®), using solution dyed UV
resistant polyester fibers (see insert below to learn why
solution dyed fabrics are better - courtesy of Glen Raven
Mills). Not only is the fabric solution dyed, the 300
denier construction is 40%
heavier than regular WeatherShield and the heavier
denier thread provides double
the tear and tensile strength.
This
superior base fabric is then finished
with the patented EPIC by Nextec® encapsulation process...the
same high performance finish used on our popular WeatherShield
fabric. Using up to 40 computer controlled proprietary
processes Nextec forces specially formulated polymers inside
the fabric to bond to each individual thread and fill the
valleys between the woven fibers (see close-up at
left). These special polymers have amazing
elasticity to block moisture and dirt, while still maintaining
the breathability of the fabric. You can see why
Nextec's slogan is "Outsmart
the Outdoors". 
Who
needs WeatherShield HD? People who live in intense sun
climates and along the coast will benefit most from this new
fabric, plus RV owners looking for the best cover for
long-term storage. It's not as compact as regular
WeatherShield, and the heavier denier fibers aren't as
silky-smooth, but for
maximum performance in the harshest environments you
can't beat WeatherShield HD.
Prices
start from $432.95
|
|
A
great value for outdoor protection.
NOAH
barrier fabric actually stops water, yet it
"breathes" to allow any trapped moisture, seam
seepage or condensation to easily evaporate. The unique
construction process (patent pending) results in a cover with
maximum all-weather protection...highly water resistant, dust
resistant, UV resistant and breathable to make sure moisture
and/or heat don't stay under the cover. Made in the U.S.
by Kimberly-Clark, the fabric weighs only 4.45 oz./sq. yd., so
it's easy to handle and fold.
 Protective
Outer Layers - A bi-component spunbond, using sheath-core
technology. The inner core is polypropylene for
strength, with a polyethylene wrap for softness. A
silver-gray color was selected because of its heat-resistant
properties. The fabric is also treated with UV
inhibitors for extended outdoor use.
Micro-Porous
Middle Layer - The
barrier layer is breathable film, a proprietary stretch-film
technology developed exclusively for Kimberly-Clark. The
film is stretched and subjected to a chemical process that
creates microscopic holes smaller than droplets of water or
dust, yet large enough to allow moisture vapor to escape.
Soft,
Paint-Protecting Inner Layer
- A bi-component fabric made with polyethylene and nylon.
This combination results in an exceptionally high
strength-to-weight ratio, with the "soft touch"
necessary for today's water-based paint finishes.
Material
color available :Silver-Gray
Prices
start from $232.95
|
|
Our
most popular custom cover fabric.....
Technalon®
covers, made with Kimberly-Clark's Evolution® 4-layer
non-woven polypropylene fabric, provide maximum protection in
all weather conditions. Often imitated, but never
equaled, U.S. made Evolution fabric covers are used by
millions of satisfied car enthusiasts around the world.
Improved
performance for 2003 with a stronger outer layer and softer
inner layer. The inner layer is constructed with similar
processes used for our Dustop™ interior storage covers -
gentle protection for fine paint finishes (inner layer is now
light gray).
- Naturally Moisture
Resistant - Acid rain, industrial pollutants, tree sap
and bird droppings will not harm the fabric.
- Dries Easily -
Moisture is not absorbed by the fabric fibers.
- Breathable - Allows
air to circulate through the fabric.
- Dust / Pollution Barrier
- The two middle layers of melt-blown fabric act as a
filtration barrier against most airborne pollutants.
- Impact Absorption -
4-layer thickness absorbs impacts better than any other
vehicle cover fabric to help protect the finish from
nicks, dings, dents and scratches.
Material
colors available - Blue, Gray or Tan
Prices
start from $199.95
|
|
Car Cover
Accessories
Cover
Lock $9.95
Storage Bag $9.95
|
|
Our most LUXURIOUS indoor
cover...
Designed for cars
that are not daily drivers, Covercraft's new Form-Fit covers
provide a body-hugging fit AND a super soft inside to pamper
fine paint finishes.
 We
start with an outer shell of woven polyester that has
Lycra/Spandex® added to the yarns to provide STRETCH
and memory - the stretch provides the body-hugging fit and the
memory assures the cover will retain its shape over an
extended period of time (they have a 4-year warranty).
The inside fibers are 100% cotton terry loop which is sheared
to a fleece-like finish. The end result is a 7.4 oz sq.
yd. material that has a great "hand", or feel.
This cover will provide some ding & dent protection for a
garage parked vehicle and the fabric is highly breathable to
prevent vapor and heat from becoming trapped under the cover.
Form-Fit covers are available in six (6) colors.
Since these covers
require special patterns, applications are limited.
Check for availability. Covers are supplied complete
with a matching fabric storage bag.
     
Prices
start from $382.95
|
|
Tan
Flannel
Favored
by traditional enthusiast, tan flannel always provides a soft
touch to pamper fine paint finishes. Designed primarily for
indoor storage use, this woven cover is constructed from a
durable polycotton blend.
 Flannel
Underside - Soft, napped finish.
Long Wearing - Over 50% heavier than our gray polycotton
fabric.
Breathable - Allows moisture to evaporate and will
not trap heat under cover.
Water Resistant - Treated for moisture repellency.
Rot, Mildew Resistant - Treated to resist rot and mildew.
Material color available - Tan
Prices
start from $224.95
|
|
 Maximum
dust protection for indoor storage.
Made in
the U.S., by Kimberly-Clark, this flannel-like fabric is a
4-layer non-woven composite, ultrasonically laminated to
provide a high degree of dust protection during inside
storage, while remaining breathable and soft against any fine
paint finish. Maximum dust protection, yet it's lighter
and easier to handle, compared to traditional woven fabrics.
- Soft
But Strong Outer Layers
- The two top layers are constructed of a polypropylene /
polyethylene composite spunbond. These layers take
advantage of the best features of both polymers: the
superior softness of polyethylene, with the strength and
stability of polypropylene.
- Dust
Barrier
- A melt-blown polypropylene layer serves as a barrier to
most dust, dirt and pollution. Dustop's multi-layer
construction provides substantially better dust protection
when compared to traditional woven, single layer fabrics.
- Softest,
Paint Protecting Inner Layer
- The high-loft polypropylene / polyethylene inner layer
pampers and protects the vehicle's finish. (These
are the same materials designed by Kimberly-Clark for some
of their softest baby diaper applications, and if
it's soft enough for a baby's skin you know it's
soft against the vehicle finish.)
Material
color available - Taupe
Prices
start from $216.95
|
|
Polycotton
 Durable,
woven polycotton blend offers good basic vehicle protection.
Polyester is sun and water resistant, while cotton gives a
soft touch to the vehicle's finish.
Drill
Weave Fabric - Resists tears and punctures.
Water Resistant - Treated for moisture repellency
Breathable - Allows evaporation of moisture and reduces heat
build-up under the cover.
Rot, Mildew Resistant - Treated to resist rot and mildew
Material color available - Gray
Prices
start from $161.95
|
|
|
